1 x 2.2KW Spindle Motor

1 x 2.2KW VFD Inverter

1 x Water Pump

1 x 80mm Spindle Clamp

A. 2200W 3HP Water Cooled CNC Milling Spindle KL-2200 

• WATER-COOLED ER20 COLLET CHUCK
• Adopt Japanese Imported Bearing
• PASS ISO9001 AND CE QUALITY CERTIFICATION
• Spec: 80*215mm(Middle body diameter 80*215mm)
• Power: 2.2KW
• Voltage: 220 V
• Frequency: 0-400HZ
• Speed: 0-24000RPM
• ER20 Collet chuck water-cooled
• Runout off: Less than 0.005mm
• Grease lubrication

B. 2.2KW Variable Frequency Drive Inverter

• Input voltage: 220V±5%
• we also stock1.5KW,3KW,4KW,5.5KW,7.5KW inverter, pls contact with us if you need)
• Input Frequency: 48-63HZ
• Output Frequency: 0-400HZ
• Input Phase: Suit for 1 phase input and 3 Phase input.
• Output: 3 Phase

Warranty: One year

Parameter set up for VFD:

PD000=0 for Parameter unlock ( 1 ) for Parameter Lock

PD001=0 (1 For Remote Control)

PD002=0 ( 1 For 0-10v Terminal Control or Remote Trim Pot Control )

( J1 Also Needs to be set for Terminal Control)

PD003=400

PD004=400

PD005=400

PD007=20

PD008=220 (Motor Rated Voltage, If you have 120v spindle then set to 120v )

PD009=15

PD010=8

PD011=120 ( 100 Minimum Setting with Quality VFD, 120 is Safe)

PD13= 08 is for Factory reset, Only use this to set VFD to Factory Default SettingsPD014

Acceleration = 12 ( Adjust to suit)

PD015 Deceleration=12 (Adjust to suit) ( PD15 is ignored IF PD26=1 Then the Spindle will

Coast to a Stop)

PD141=220 ( Motor Rated Voltage ) (120 for VFD Rated for 120v )

PD142= ( Motor Max Amps) PD142=( 220vSet for your motor Amp Rating 2.2Kw Spindle

9 amp )

PD142=( 220VSet for your motor Amp Rating 1.5Kw Spindle 7 amp )

PD142=( 220v Set for your motor Amps Rating 800w Spindle 4 amps )

PD142=( 120v Set for your motor Amp Rating 800w Spindle 7 amp )

PD143=2 ( Motor Number of Poles)

PD144=3000 (Max Motor RPM) =3,000= (24,000)

PD70=0 ( This may need to be set to 1 if Control Voltage is 0-5v )

PD72=400

PD73=120 ( 100 Minimum Setting )

If you have E. Lv. S error code alarm

Pls set

PD200=65535

PD209=70