7.5KW (10HP) Variable Frequency Drive Inverter VFD 34A

Regarding the wire connection, please connect "R" and "T" (at the inverter) to the shingle phase power supply ( connect "R" and "S" or "S" and "T" both are ok.) If you use it as three phase input, then please connect the three phase power supply to "R, S T".

"U, V, W " connect to a motor.

And the VFD need connect with the motor directly, cannot connect breaker or switch

between the VFD and motor

NEW Variable Frequency Drive,  VFD

10 HP 7.5KW 34A 220V-250V

1) Input: 220VAC ±15%   1 or 3 Phase (R, S or R, T or S, T)    50/60Hz

2) Output: 220VAC  3 Phase ( U, V, W)   7.5kw

3) Output Frequency: 0-400 Hz

4) Warranty: 1 year

Settings:

P0.00=0 (V/F Control)

P0.00=1 (Sensorless Vector Control)

P0.00=2 (Torque Control)

P0.03=300 or 400 HZ (depends on your spindle)

P0.04=300 or 400 HZ (depends on your spindle)

P0.05=0

P0.06=300 or 400 HZ (depends on your spindle)

P0.07=1 (Potentiometer on keypad)

P2.02=300 or 400 HZ (depends on your spindle)

P0.17=1 (Restore parameters as factory setting)