The store will not work correctly when cookies are disabled.
Touch Screen CNC Console
-
CNC4PC Pendant for Mach4 with C22M1
Used software: Mach4 4.2.0.4612, PLUGINS ESS V275
Used hardware: C82 R4 and C22M1 R1.
STEP 2: Connect the C22M1 to the USB port, Right Click on the USB Serial port, Select Update Driver Software.
STEP 3:
STEP 4:
STEP 5: Configure/Control/Plugins
STEP 6: Configure/Plugins/Modbus
STEP 7: CONFIGURING THE CONTROL SOFTWARE: To configure use the following sample configuration screen:
STEP 8: Add Modbus Function
STEP 9: To configure Encoder use the following sample configuration screen:
Mach4 configure
STEP 10 : Configure/Controller/Input Signal
STEP 11 : Configure/Controler/Output Signal
STEP 12 : Configure/Controler/MPGs
STEP 13 : You can download, install, and use this screen:
Read more »
-
CNC4PC Pendant for Mach4 with C22M1
Used software: Mach4 4.2.0.4612, PLUGINS ESS V275
Used hardware: C82 R4 and C22M1 R1.
STEP 2: Connect the C22M1 to the USB port, Right Click on the USB Serial port, Select Update Driver Software.
STEP 3:
STEP 4:
STEP 5: Configure/Control/Plugins
STEP 6: Configure/Plugins/Modbus
STEP 7: CONFIGURING THE CONTROL SOFTWARE: To configure use the following sample configuration screen:
STEP 8: Add Modbus Function
STEP 9: To configure Encoder use the following sample configuration screen:
Mach4 configure
STEP 10 : Configure/Controller/Input Signal
STEP 11 : Configure/Controler/Output Signal
STEP 12 : Configure/Controler/MPGs
STEP 13 : You can download, install, and use this screen:
Read more »
© 2017 CNC4PC. All Rights Reserved.