OVERVIEW

This board interface is used for the connection between the AcornSix 6-axis CNC controller and the CLEAR PATH SERVO-DRIVE.

FEATURES 

• Enable and disable the drives.
• Splits Step and Direction signals from axis X or Y to allow wiring an additional axis using the same signals.
• The board can be activated and start monitoring for a driver's fault using the axis enable or NO_FAULT signal.
• Electromechanical relay reflects the ACTIVE / FAULT Status of a servo.
• Power terminal (12VDC / 24VDC).
• Status LEDs for fault axis and relay status.
• Connector CONMOLEX 8P for driver CLEAR PATH.
• Pluggable Screw-On Terminals