DMM DYN4 Servo Kit 1000W

$514.25
SKU
DK1000W-3

Combining the latest DMM servo control technology with 16-bit high resolution feedback and brand new monitor functions, the DYN4 AC Servo Drive achieves ultimate accessible performance. 

Industry standard pulse/analog/serial interface, easy PC set up and low cost makes the DYN4 AC Servo Drive most applicable and suitable for any motion control application.

 

  • 4-wire high speed serial encoder bus, with 8-bit security code
  • DMMDRV4© graphical interface, Adaptive Tuning Technology
  • Single/Three-Phase 110~240VAC ± 10% 50/60Hz input
  • Industry standard Position, Velocity, Torque servo modes
  • Serial [UART,SPI], Pulse/Sign, CW/CCW, A/B Quadrature, and Analog Command
  • A/B/Z Quadrature incremental encoder output
  • Motor Current, Absolute Position, Position Error Monitor Outputs
  • RS485/RS232 networking
  • Integrated Point to Point S-curve motion, linear & circular coordinated motion
Servo Motor Model11A-DST-A6 _ _ 1
Rated Output 1.0kW
Rated Voltage 200V
Applicable Servo Drive DYN4
Rated Torque 4.77Nm
Instantaneous Max. Torque 14.3Nm
Rated Current 8.2A
Max. Current 24.6A
Rated Speed 1500rpm
Max. Speed 3000rpm
Rotor Inertia 8.5kg-cm^2
Torque Coefficient 0.774N∙m/A
Encoder 16-bit Absolute [ ABS-16-01 ]
Mass 8.95kg
Ratings Time Rating: Continuous
Thermal Class: F
Excitation Method: Permanent Magnet
Insulation Resistance: DC500V, >20MΩ
Noise: ≤60dB; No Special Noise
Environment Ambient Temperature: 0~40 °C
Storage: -20~50°C
Ambient Humidity: 20~80%
No Condensation
Enclosure IP65
Shock 98m/s2 Max. (10G)

More Information
SKU DK1000W-3
Manufacturer DMM-Tech
Watts 1000
Shaft Size 19mm
Shaft Type Keyed
Motor Frame 130mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Part# Product/Link Qtty
11A-DST-A6HK1DST 1kW AC servo motor W/ 16bit Encoder1
C34DYN4RJ45 TO DRIVER BOARD for DYN41
DYN4-H01A2-0DYN4 AC Servo Drive - H01 Frame1
© 2017 CNC4PC. All Rights Reserved.