DMM DYN4 Servo Kit 1300W

$621.25
SKU
DK1300W-1

Combining the latest DMM servo control technology with 16-bit high resolution feedback and brand new monitor functions, the DYN4 AC Servo Drive achieves ultimate accessible performance. 

Industry standard pulse/analog/serial interface, easy PC set up and low cost makes the DYN4 AC Servo Drive most applicable and suitable for any motion control application.

 

  • 4-wire high speed serial encoder bus, with 8-bit security code
  • DMMDRV4© graphical interface, Adaptive Tuning Technology
  • Single/Three-Phase 110~240VAC ± 10% 50/60Hz input
  • Industry standard Position, Velocity, Torque servo modes
  • Serial [UART,SPI], Pulse/Sign, CW/CCW, A/B Quadrature, and Analog Command
  • A/B/Z Quadrature incremental encoder output
  • Motor Current, Absolute Position, Position Error Monitor Outputs
  • RS485/RS232 networking
  • Integrated Point to Point S-curve motion, linear & circular coordinated motion
Servo Motor Model115-DST-A6 _ _ 1
Rated Output 1.3kW
Rated Voltage 200V
Applicable Servo Drive DYN4-T01
Rated Torque 8.27Nm
Instantaneous Max. Torque 23.3Nm
Rated Current 10.7A
Max. Current 29.5A
Rated Speed 1500rpm
Max. Speed 3000rpm
Rotor Inertia 18.9kg-cm^2
Torque Coefficient 0.929N∙m/A
Encoder 16-bit Absolute [ ABS-16-01 ]
Mass 9.33kg
Ratings Time Rating: Continuous
Thermal Class: F
Excitation Method: Permanent Magnet
Insulation Resistance: DC500V, >20MΩ
Noise: ≤60dB; No Special Noise
Environment Ambient Temperature: 0~40 °C
Storage: -20~50°C
Ambient Humidity: 20~80%
No Condensation
Enclosure IP65
Shock 98m/s2 Max. (10G)

More Information
SKU DK1300W-1
Manufacturer DMM-Tech
Watts 1300
Shaft Size 19mm
Shaft Type Keyed
Motor Frame 130mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Part# Product/Link Qtty
115-DST-A6HK1130mm Frame, 1.3kW, Keyed Shaft1
C34DYN4RJ45 TO DRIVER BOARD for DYN41
DYN4-T01A2-00DYN4 AC Servo Drive - T01 Frame1
© 2017 CNC4PC. All Rights Reserved.