DMM DYN4 Servo Kit 750W

$466.25
SKU
DK750W-4

Combining the latest DMM servo control technology with 16-bit high resolution feedback and brand new monitor functions, the DYN4 AC Servo Drive achieves ultimate accessible performance. 

Industry standard pulse/analog/serial interface, easy PC set up and low cost makes the DYN4 AC Servo Drive most applicable and suitable for any motion control application.

  • 4-wire high speed serial encoder bus, with 8-bit security code
  • DMMDRV4© graphical interface, Adaptive Tuning Technology
  • Single/Three-Phase 110~240VAC ± 10% 50/60Hz input
  • Industry standard Position, Velocity, Torque servo modes
  • Serial [UART,SPI], Pulse/Sign, CW/CCW, A/B Quadrature, and Analog Command
  • A/B/Z Quadrature incremental encoder output
  • Motor Current, Absolute Position, Position Error Monitor Outputs
  • RS485/RS232 networking
  • Integrated Point to Point S-curve motion, linear & circular coordinated motion

 

Motor Specification
Servo Motor Model880-DST-A6 _ _ 1
Rated Output 0.75kW
Rated Voltage 200V
Applicable Servo Drive DYN4
Rated Torque 2.39Nm
Instantaneous Max. Torque 7.16Nm
Rated Current 4.4A
Max. Current 13.4A
Rated Speed 3000rpm
Max. Speed 5000rpm
Rotor Inertia 0.73kg-cm^2
Torque Coefficient 0.547N∙m/A
Encoder 16-bit Absolute [ ABS-16-01 ]
Mass 2.69kg
Ratings Time Rating: Continuous
Thermal Class: F
Excitation Method: Permanent Magnet
Insulation Resistance: DC500V, >20MΩ
Noise: ≤60dB; No Special Noise
Environment Ambient Temperature: 0~40 °C
Storage: -20~50°C
Ambient Humidity: 20~80%
No Condensation
Enclosure IP65
Shock 98m/s2 Max. (10G)
More Information
SKU DK750W-4
Manufacturer DMM-Tech
Watts 750
Shaft Size 19mm
Shaft Type Keyed
Motor Frame 80mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Part# Product/Link Qtty
880-DST-A6HK1DST 0.75kW AC servo motor W/ 16bit Encoder1
C34DYN4RJ45 2 DRIVER BOARD for DYN41
DYN4-H01A2-0DYN4 AC Servo Drive - H01 Frame1
© 2015 CNC4PC. All Rights Reserved.