Note that the ACORN is software and hardware integrated system, so it only works with the ACORN software.
You can download and install the acorn software and play with it your PC, but you will need the ACORN board to do actual motion control.
The ACORN ...
Read more
Please note that the C86ACORN and C86ACCP do require all the enable lines to the drives to be enabled in order to determine that the system is active and to start monitoring a driver's fault.
When you initially activate the CNC12 software, it really...
Read more
YES! The boards we are shipping as of today have a circuit that allows better handling the issue. Now you can enable from the NO_FAULT output from the ACORN or from an axis enable signal from the ACORN.
Read more
This will work with any CAM package that will put out gcode, including VCarve.
Read more
Yes, you can use a touch screen with this.
Read more
If using Clearpath servos and using the hardware slave option of the C86ACCP, you can reverse the slave motor by inverting the direction of rotation in the motor itself, but changing the configuration by logging into it using the USB cable.
Read more