NEMA 23 Closed Losed Loop Stepper Motor System-Hybrid Servo KIT, 425 OZ-IN,SHAFT SIZE: 1/4″
$179.98
In stock
In stock
SKU
6060D-23-28-1000
NEMA 23 Closed Losed Loop Stepper Motor System-Hybrid Servo KIT, 425 OZ-IN,SHAFT SIZE: 1/4″
Kits include:
1pc 6060D Hybrid Servo Driver
1pc 23-28-1000 Hybrid Stepper Motor
1pc 10ft Extension Encoder Cable
1 pcs Power cable
6060D Features:
- Closed-loop control, no longer lose any steps, up to its maximum torque;
- higher torque and higher speed;
- Fast response;
- Reduced motor heating and more efficiency;
- Zero-speed stability;
- Smooth motion and super-low motor noise;
- No Tuning and always stable;
- Lower cost.
Electrical Specifications:
- Input Voltage(DC): 20 - 60 VDC
- Output Current: 0 - 6.0 A
- Pulse Signal Frequency: 0 - 200 KHZ
- Logic Signal Current: Min: 7MA,
Typical: 10MA,
Max: 16MA
23-28-1000 Closed Loop Stepper Motor 425 oz-in, Shaft size: 1/4"
- Number of Phases: 2, Nema 23
- Step Angle: 1.8° ± 5%
- Holding Torque: 425 oz-in
- Voltage: 2.03 VDC
- Current: 4.5A
- Phase Resistance (20℃): 0.45Ω ± 20%
- Phase Inductance (1KHz): 2.0mH ± 20%
- Rotor Inertia: g· cm²
- Insulation Resistance: 100MΩ 500VDC
- Insulation Class: B (130℃)
- Ambient Temperature: -20℃ to 50℃
- Ambient Humidity: 15% to 95%
Motor Phase A+(Blue)
Motor Phase A- (Yellow)
Motor Phase B+ (Black)
Motor Phase B- (Red)
Encoder Extension Cable Pin Out:
Pinout EGND- (White)
Pinout VCC (Red)
Pinout EA- (Blue)
Pinout EA+ (Black)
Pinout EB- (Green)
Pinout EB+ (Yellow)
Shaft Size | 1/4" |
---|---|
Motor Frame | Nema 23 |
Dual/Single Shaft | Single |
Closed Loop | Yes |
Write Your Own Review
   Frequently Asked Questions and Answers
We found other products you might like!
-
Closed Loop Stepper Servo Kit
From $4.90
To $884.40
-
Closed-Loop Nema23 Stepper Controller$1,336.34