NEMA 24 CLOSED-LOOP STEPPER MOTOR KIT: 425 OZ-IN, 8MM SHAFT

NEMA 24 Closed Loop Stepper Kit Includes:

One Closed Loop Stepper Driver 5080D4/CS-D508
One NEMA24 Closed Loop Stepper Motor CS-M22430, Shaft Size 8MM
One Encoder Cable, 3 meter
One Motor Power Cable, 3 meter

Please set SW5 off, Sw6: Off, SW7: Off, SW8: off

Introduction:

1. 5080D4/CS-D508

5080D4/CS-D508 is a closed-loop stepper drive. When used to drive a 2-phase stepper motor in frame sizes NEMA 8, 17, 23, or 24 with an incremental rotary encoder, it can close the position loop between the motor and drive and therefore eliminate the loss of step problem in an open-loop system.

Feature of 5080D4/CS-D508:

Step & direction or CW/CCW control modes
Supply voltage of 20-50 VDC, maximum output current of 8.0A
Powering 2-phase stepper motors of NEMA 8, 11, 14, 17, 23, and 24
Fault output, brake control, or in-position output.
No loss of steps for the closed position loop
No tuning
No overshooting
No torque margin
Reduced motor heating and more efficient
Smooth motion and super-low motor noise
CE certified and RoHS compliant

Applications:

The 5080D4/CS-D508 closed loop stepper drive is suggested to be implemented along with a compatible 2-phase stepper motor (usually NEMA 17, 23, and 24) with a 1000-line encoder. That closed stepper system can be used to upgrade open-loop stepper systems or replace some servo systems, especially in many small to medium speed applications such as CNC routers, CNC mills, CNC laser cutters, CNC plasmas, lab automation instruments, electronic equipment, small packaging machines, etc.

2. CS-M22430

The CS-M22430 is a 2 phase stepper motor with 3 N.m (425 oz-in) holding torque and integrated with a 1,000 line (4,000 counts/revolution) differential-ended rotary encoder. Build with high-quality materials including bearings and shaft made by Japanese manufacturers, this closed-loop stepper motor can be adopted in many industrial applications with excellent performance such as high precision, low motor heating, and low vibration.

Model:	CS-M22430
Frame Size:	NEMA 24 (60mm)
Phase:	2
Step Angle:	1.8°
Accuracy:	±0.9°
Length:	107 mm (4.21 inch)
Number of Wires:	4
Holding Torque:	3N.m (425 oz-in)
Phase Current:	5 A/Phase
Encoder Resolution:	1000 Line (4000 counts/per revolution)
Voltage:	2.3 V
Resistance:	0.46 Ω
Inductance:	2 mH
Rotor Inertia:	0.69 kg-cm2 (0.00977 oz-in-sec2 )
Shaft Size:	8 mm (0.315 inch)
Shaft Type:	Single
Weight:	1.5 kg (3.3 lb)
Insolation Class:	B
Insolation resistance:	Min 100 MΩ,500 VDC)
Operating Temperature:	-10 - 50°C (14 - 122°F)
Temperature Rise (Max):	80K
Radial Play:	Max 0.02 mm with 450g load
Axial Play:	Max 0.08 mm with 900g load