NEMA34 Closed Loop Stepper Motor System- Hybrid Servo Kit-32 bit DSP Based, 1128 oz-inED
The Hybrid Servo Driver series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high-performance drive and an internal encoder which is used to close the position, velocity, and current loops in real-time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system.
NEMA 34 Hybrid Servo kit (closed-loop stepper system):
1pc Hybrid Servo Driver 8082H,
1pc NEMA34 34-8N-1000 Hybrid Servo Motor with one Encoder 1000 line,
1pc 1.5 meter cable or longer
A: KL-8082H 2-phase Hybrid Servo Driver:
30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization
Closed-loop eliminates loss of synchronization
Broader operating range – higher torque and higher speed
Reduced motor heating and more efficient
Smooth motion and super-low motor noise
Do not need a high torque margin
No Tuning and always stable
Fast response, no delay, and almost no settle time
High torque at starting and low speed, high stiffness at standstill
Lower cost
B: NEMA34 Hybrid Servo Motor, KL34-8N-1000, 1/2" Shaft
Rated Torque 1128 oz-in, 8 N-m, with Encoder 1000 line
C: 1.5-meter Encoder cable
1000 pulses per revolution
Quadrature digital signals: 4000 steps per revolution
4000 / .05 pitch
80,000 counts per unit
Dual/Single Shaft | Single |
---|---|
Motor Frame | Nema 34 |
Shaft Size | 1/2" |
Closed Loop | Yes |
From $4.90
To $1,020.24