CNC4PC
Overview
Rexstep Motors stand out with their superior power to weight ratio due to the square frame design combined with the best materials and most up-to-date processes in stepper technology.
Design Considerations Select a torque size with a 100% safety factor for torque output at given speeds. Do not set ramping speed faster than the motor's ability to accelerate load. Do not connect or disconnect motor unless system power is off. Do not use the motor's bearing to support drive screws in place of a proper bearing block. When direct driving a drive screw, select a coupler with shaft misalightment allowance. For best heat disappation, bolt motor to an aluminum mounting plate. Limit motor current to rated current per phase for smoother stepping operation. Do not disassemble the motor. This wil degrade torque output and step smoothness. Do not attempt to modify the shaft without first consulting us for guidelines.
Dual/Single Shaft | Single |
---|---|
Motor Frame | Nema 34 |
Shaft Size | 1/2" |
From $2.50
To $347.10