UC100 - USB Motion Controller

From $126.50

To $291.50

In stock

SKU
UC100_B

UC100 - USB Motion Controller

Customize UC100 - USB Motion Controller
1 x UC100 USB MOTION CONTROLLER   + $126.50

* Required Fields

Your Customization
UC100 - USB Motion Controller
UC100 - USB Motion Controller

In stock

$126.50

Summary

    USB Motion Controller

    • Automatic Firmware checking and Firmware update.
    • Motion control on up to 6-axis (X, Y, Z, A, B, C).
    • Configurable maximum stepping frequency, the options are 25kHz(with 20usec pulse length), 50kHz(with 10usec pulse length), 100kHz(with 5usec pulse length).
    • 12 5Volt 20mA (TTL level) buffered outputs with current sink/source capability. 5 input pins with at 5V (TTL level) with Schmitt triggered filtered inputs internally pullup to 5Volts at 4.7kOhms.  
    • 100% LPT port compatible pinout.
    •  Does not include a DB25 gender changer, So if your breakout board has a female connector, you will need to add one of these gender changer: A19.
    • Note that this device is not optically isolated and will make the grounds of the breakout board common with the grounds of the PC.  Faulty wiring on the controller could allow a ground loop with the main power supply, which may cause damage to the UC100 or even the PC.  Using this isolator board will protect your system: C83

     

    Supported Mach3 functions:

    •  Jog.
    •  Reference inputs.
    •  E-stop input.
    •  Soft limits.
    •  Limit switch inputs.
    •  Limits override.
    •  Index input (extended function supports multi-slot spindle sensors)
    •  Spindle speed PWM control output.
    •  Step and direction spindle control output.
    •  Spindle and coolant relay control.
    •  Charge pump safety signal output (configurable to active/inactive when in E-stop).
    •  Charge pump adjustable frequency (12.50kHz in normal or 5kHz in laser mode).
    •  All signals configurable to active High/Low.
    •  General-purpose I/O signals handling.
    •  Offline mode.
    •  All MPGs and encoders support. (2pcs maximum one time)
    •  Slave axis.
    •  Backlash compensation.
    •  Digit/probe input.
    •  THC control inputs.

     

    Be aware that counterfeit UC100 motion controllers are sold on e-bay!

    The fake devices will not work with our software!

    Please follow this link for more informations:http://www.forum.cncdrive.com/viewtopic.php?f=2&t=140

     

     

    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account

       Frequently Asked Questions and Answers


    File(s)

    We found other products you might like!
    © 2017 CNC4PC. All Rights Reserved.